In this tutorial we are going to make a clap switch using a Sound Sensor & Arduino. Whenever you clap an LED will Turn On or Off. There is also a schematic below on how to use it with a relay and a light bulb. Watch the Video! Step 1: What You Will Need …
In this tutorial we will learn how to make a Pulse Generator with a Frequency Sweep. Pulse generator will start with 1Hz and increase its frequency for 0.5Hz every second. Once it reaches 10Hz it wil stop increasing the frequency. You can set your own Starting frequency, End frequency, Frequency increment, and the increment interval. Step 1: What …
In this tutorial we will learn how to control the MAX7219 Led matrix with Arduino by displaying a simple text. Watch a demonstration video. Step 1: What You Will Need Arduino UNO (or any other Arduino) LED MATRIX. We are going to use the FC-16 module which has four casacaded 8×8 LED Matrix Displays and …
In this tutorial, we will learn how a Tilt Sensor works and how to use it with the Arduino Board for detecting motion. Read Full tutorial here.
In this tutorial we will learn how to detect the force applied to the Force Sensing Resistor (FSR) and display it on the OLED Display + we will set the limits with a green and a red LED. Read Full tutorial here.
In this tutorial we will learn how to detect shock vibrations using a simple Piezoelectric sensor Vibration module and Visuino. Read Full tutorial here.
How to use Capacitive touch sensor and a handhel toy fan. Read Full tutorial here.
How to make running LED with Arduino. A simple project with a lot of possibilities. Read Full tutorial here.
How to use Vibration sensor and a buzzer to make a “Beep” sound on any vibration. Read Full tutorial here.
How to Use Ultrasonic Distance module, and Visuino to display ultrasonic range on Lcd and set the limit with a red colored LED. Read Full tutorial here.
How to Connect Arduino UNO , servo motor and Visuino to spin the servo motor Read Full tutorial here.
How to use Arduino UNO, OLED Lcd, MQ-3 Alcohol Gas Sensor module, and Visuino to display Alcohol levels on OLED Display and set the limit detection where it says “Too Drunk”. Read Full tutorial here.
In this tutorial we’re going to use a LED attached to Arduino UNO and Visuino to change it’s lighting brightness using Pulse Width Modulation (PWM). Read Full tutorial here.
In this tutorial we’re going to use Inductive Proximity Sensor and a Light-emitting Diode attached to Arduino UNO and Visuino to determine metal closeness. Read Full tutorial here.
In this tutorial we will implement a step UP (0,9-5V to 5V) Voltage Booster to run Arduino UNO with a 1.5V Battery Power. Read Full tutorial here.
In this tutorial we’re going to use a XYC-WB-DC micro wave Radar movement Sensor attached to Arduino UNO and Visuino to sense any movement in distance across 5m which includes thin walls. Read Full tutorial here.
In this tutorial we’re going to use a LCD TFT ST7735 connected to Arduino UNO and Visuino to show a picture and a random number. Read Full tutorial here.
In this tutorial we will use Arduino and Visuino to show a actual cycling Speed from GPS UNIT on ST7735 LCD display. Read Full tutorial here.
Discover just how simple it is to program Arduino to control Servo motor using Visuino. Read Full tutorial here.