Clock Generator

From Visuino
Jump to: navigation, search

TArduinoClockGenerator.png

Summary

Generates periodic clock

Description

Use this component to generate periodic clock.

You can use a Clock Generator to setup up timing for a Clock pin.

E.g. A setting of "1" will set it off once per second, and a "2" will be twice per second, and so on.

Conversely and setting of ".5" will be 1 every 2 seconds.



Resources:

Instructable: Arduino: Control Servo with Buttons

Instructable: Arduino Nano: DHT11 Temperature a Humidity I2C 2 X 16 LCD Display With Visuino

Instructable: Remote Wi-Fi DHT11 Temperature a Humidity I2C 2 X 16 LCD Display With Two ESP8266 and Visuino

Instructable: ESP8266 and Visuino: Wi-Fi Network Scanner

Instructable: RS485 Serial Communication Between Arduino Mega and Arduino Nano With Visuino

Instructable: Arduino Nano: BMP180 Barometric Pressure and Temperature I2C 2 X 16 LCD Display with Visuino

Instructable: Visuino: Use the Adafruit IO MQTT to remotely access and control Controllino MEGA PLC

Instructable: Arduino Nano and Visuino: Display BME280 Temperature Humidity and Pressure on Nextion Display Scope

Diagram:

TArduinoClockGenerator.Preview.png

Categories

Properties

  • Frequency - Specifies the Frequency of the generator
  • Enabled - Enables or disable the component.

Pins

  • Out - The Clock Output pin of the component or element