User contributions for Visuino

16 August 2025

• 01:0101:01, 16 August 2025 diff hist +1,367 N CPU Time Created page with "Image:TArduinoCPUTime.png == Summary == Provides CPU uptime in milliseconds and microseconds, and allows creation of software clocks. == Description == The CPU Time component outputs the elapsed time since the CPU started running, available both in Milliseconds and Microseconds. In addition, you can configure Elements that act as software clocks. Each software clock can be set to a specific current time, after which it will continue to update and provide a running..." current
• 01:0001:00, 16 August 2025 diff hist 0 N File:TArduinoCPUTime.Preview.png No edit summary current

15 August 2025

• 12:4212:42, 15 August 2025 diff hist +2,144 N Compare Date/Time Range Created page with "Image:TArduinoDateTimeCompareRange.png == Summary == Checks whether a Date/Time input is within or outside a specified range. == Description == The Compare Date/Time Range component evaluates the incoming Date/Time value on In and determines if it lies inside or outside the configured range between Range Min and Range Max. The Items property allows you to choose which parts of the Date/Time (Years, Months, Days, Hours, Minutes, Seconds, Milliseconds, Week Days) are..." current
• 12:4112:41, 15 August 2025 diff hist 0 N File:TArduinoDateTimeCompareRange.Preview.png No edit summary current
• 12:3312:33, 15 August 2025 diff hist +1,261 N Date/Time Demux(Multiple Output channel Switch) Created page with "Image:TArduinoDateTimeDemuxMultipleOutputChannelSwitch.png == Summary == Routes a Date/Time input to one of multiple outputs based on a channel selection. == Description == The Date/Time Demux (Multiple Output Channel Switch) component allows a single Date/Time input to be directed to one of several output pins depending on the Select pin value. Initial Channel sets the default output channel when the component starts. Output Pins defines the number of output cha..." current
• 12:3112:31, 15 August 2025 diff hist 0 N File:TArduinoDateTimeDemuxMultipleOutputChannelSwitch.Preview.png No edit summary current
• 09:2609:26, 15 August 2025 diff hist +1,329 N Decode(Split) Date/Time Created page with "Image:TArduinoDecodeDateTime.png == Summary == Extracts individual date and time elements from a Date/Time input. == Description == The Decode (Split) Date/Time component takes a Date/Time value from its In pin and splits it into its constituent parts: Year, Month, Day, Hour, Minute, Second, and Millisecond. Each element is output through its corresponding pin for use in other components or logic. This is useful in: Robotics – breaking down timestamps for loggi..." current
• 09:2209:22, 15 August 2025 diff hist +1,779 N Encode(Make) Date/Time Created page with "Image:TArduinoEncodeDateTime.png == Summary == Builds a complete Date/Time value from individual date and time inputs or predefined initial values. == Description == The Encode (Make) Date/Time component assembles a full Date/Time output from separate date and time elements such as Year, Month, Day, Hour, Minute, Second, and Millisecond. If an input pin is unconnected, the corresponding value is taken from the Initial Value property. When the Clock pin is triggered..." current
• 09:1609:16, 15 August 2025 diff hist +1,667 N Add Date/Time Created page with "Image:TArduinoDateTimeAdd.png == Summary == Adds a fixed offset to a Date/Time input as specified in the component’s properties. == Description == The **Add Date/Time** component modifies the incoming Date/Time value by adding exactly the amounts set in its properties. Each property (years, months, days, hours, minutes, seconds, milliseconds) contributes to the total offset applied. If a property is left at zero, that unit of time is unchanged. No additiona..." current
• 09:1609:16, 15 August 2025 diff hist 0 N File:TArduinoDateTimeAdd.Preview.png No edit summary current
• 09:0709:07, 15 August 2025 diff hist +1,315 N Ignore Date/Time Values Created page with "Image:TArduinoIgnoreDateTimeValues.png == Summary == Configurable Date/Time filter that forwards or suppresses values based on equality and “before” rules. == Description == The **Ignore Date/Time Values** component compares the incoming **In** value against the configured **Value**. Its behavior is controlled by: - **Pass Equal Values** – when **True**, inputs equal to **Value** are forwarded; when **False**, they are suppressed. - **Pass Values Before..." current
• 09:0609:06, 15 August 2025 diff hist 0 File:TArduinoIgnoreDateTimeValues.Preview.png Visuino uploaded a new version of File:TArduinoIgnoreDateTimeValues.Preview.png current
• 09:0309:03, 15 August 2025 diff hist +1,535 N Ignore Date/Time Ranges Created page with "Image:TArduinoIgnoreDateTimeRanges.png == Summary == Filters Date/Time values based on one or more configurable time ranges. == Description == The **Ignore Date/Time Ranges** component compares the incoming **In** value against a set of user-defined **Range** elements. Each range specifies minimum and maximum Date/Time limits, along with inclusion rules for the boundaries. If the input falls within any of the defined ranges (respecting the “equal” settings)..." current
• 09:0309:03, 15 August 2025 diff hist 0 N File:TArduinoIgnoreDateTimeRanges.Preview.png No edit summary current
• 08:5808:58, 15 August 2025 diff hist +1,125 N Date/Time Toggle Demux Created page with "Image:TArduinoDateTimeToggleDemux.png == Summary == Directs a Date/Time input to one of two outputs based on a boolean control signal. == Description == The **Date/Time Toggle Demux** component outputs the Date/Time input to either the **True** or **False** output depending on the **Select** pin. - **Initial Select Value** sets the default output path when the component starts. This component is useful for dynamically routing Date/Time signals based on a boole..." current
• 08:5808:58, 15 August 2025 diff hist 0 N File:TArduinoDateTimeToggleDemux.Preview.png No edit summary current
• 08:5408:54, 15 August 2025 diff hist +989 N Date/Time Multi Source Created page with "Image:TArduinoDateTimeMultiSource.png == Summary == Splits a Date/Time input into multiple outputs based on the configured number of output pins. == Description == The **Date/Time Multi Source** component allows you to distribute a single Date/Time input across multiple output pins. You can set the number of output pins via the **Output Pins** property (default: 2). Each output pin will carry the same Date/Time value from the input, enabling parallel processing..." current
• 08:0108:01, 15 August 2025 diff hist +1,085 N Date/Time Change Only Created page with "Image:TArduinoDateTimeChangeOnly.png == Summary == Outputs a new Date/Time value only when it changes from the previously stored value. == Description == The **Date/Time Change Only** component monitors the incoming **In** Date/Time signal and compares it to the last output value. If the value is different, the new Date/Time is passed to **Out**. If it is the same, no update is sent, reducing unnecessary downstream updates. This is useful for: - **Data logging..." current
• 08:0008:00, 15 August 2025 diff hist 0 N File:TArduinoDateTimeChangeOnly.Preview.png No edit summary current
• 07:5607:56, 15 August 2025 diff hist +1,176 N Min Date/Time Value Created page with "Image:TArduinoMinValueDateTime.png == Summary == Tracks and outputs the earliest (minimum) Date/Time value from the input; a reset pin clears the detection. == Description == The **Min Date/Time Value** component monitors the incoming **In** signal and keeps the earliest Date/Time value received since the last reset or since startup. When **Reset** is triggered, the stored minimum is cleared, and the next incoming value becomes the new baseline for tracking. Thi..." current
• 07:5507:55, 15 August 2025 diff hist 0 N File:TArduinoMinValueDateTime.Preview.png No edit summary current
• 07:5407:54, 15 August 2025 diff hist +1,179 N Max Date/Time Value Created page with "Image:TArduinoMaxValueDateTime.png == Summary == Tracks and outputs the latest (maximum) Date/Time value from the input; a reset pin clears the detection. == Description == The **Max Date/Time Value** component monitors the incoming **In** signal and keeps the most recent (latest) Date/Time value received since the last reset or since startup. When **Reset** is triggered, the stored maximum is cleared, and the next incoming value becomes the new baseline for trac..." current
• 07:5307:53, 15 August 2025 diff hist 0 N File:TArduinoMaxValueDateTime.Preview.png No edit summary current
• 07:5007:50, 15 August 2025 diff hist +59 Max Integer Value No edit summary current
• 07:4707:47, 15 August 2025 diff hist +1,404 N 3D Orientation Snapshot Created page with "Image:TArduino3DOrientationSnapshot.png == Summary == Captures and holds a 3D orientation value on a snapshot trigger. == Description == The **3D Orientation Snapshot** component stores the orientation present at its **In** pin when the **Snapshot** pin is triggered. The stored value is held and output continuously until another snapshot event occurs. This is useful for “freezing” the 3D orientation state at a specific moment for further processing or outpu..." current
• 07:4607:46, 15 August 2025 diff hist 0 N File:TArduino3DOrientationSnapshot.Preview.png No edit summary current
• 07:4307:43, 15 August 2025 diff hist +1,360 N 3D Orientation Change Only Created page with "Image:TArduino3DOrientationChangeOnly.png == Summary == Outputs a 3D orientation only when it changes from the previous value. == Description == The **3D Orientation Change Only** component monitors the incoming 3D orientation signal and compares it to the last output value. If the orientation changes, the new value is passed to **Out**; if it remains the same, no output update is sent. This helps prevent unnecessary updates in systems where only changes are re..." current
• 07:4207:42, 15 August 2025 diff hist 0 N File:TArduino3DOrientationChangeOnly.Preview.png No edit summary current
• 07:3807:38, 15 August 2025 diff hist +1,607 N Remember 3D Orientation Value Created page with "Image:TArduinoRemember3DOrientationValue.png == Summary == Stores and recalls a 3D orientation value on command. == Description == The **Remember 3D Orientation Value** component allows you to store the current incoming 3D orientation and later recall it. When a signal is received on **Remember**, the current **In** value is saved internally. When a signal is received on **Recall**, the stored value is sent to **Out**. This is useful in: - **Robotics** – mem..." current
• 07:3807:38, 15 August 2025 diff hist 0 N File:TArduinoRemember3DOrientationValue.Preview.png No edit summary current
• 07:3507:35, 15 August 2025 diff hist +1,661 N 3D Orientation Value Created page with "Image:TArduino3DOrientationValue.png == Summary == Generates a fixed 3D orientation signal with optional state-change control. == Description == The **3D Orientation Value** component outputs a constant 3D orientation state, selectable from six directions (**Go Up**, **Go Right**, **Go Left**, **Go Down**, **Go Front**, **Go Back**). It supports configurable element actions, such as setting the orientation immediately or in response to a clock signal. This compo..." current
• 07:3407:34, 15 August 2025 diff hist 0 N File:TArduino3DOrientationValue.Preview.png No edit summary current
• 07:3107:31, 15 August 2025 diff hist +994 N 3D Orientation Multi Source Created page with "Image:TArduino3DOrientationMultiSource.png == Summary == Distributes one 3D orientation input to multiple outputs. == Description == The **3D Orientation Multi Source** component takes a single 3D orientation on **In** and replicates it to **N** outputs, where **N** is set by **Output Pins**. All outputs carry the same orientation, and any change at the input is propagated to every output. <b>Diagram:</b> Image:TArduino3DOrientationMultiSource.Preview.png..." current
• 07:3107:31, 15 August 2025 diff hist 0 N File:TArduino3DOrientationMultiSource.Preview.png No edit summary current
• 07:2707:27, 15 August 2025 diff hist +994 N 2D Orientation Multi Source Created page with "Image:TArduino2DOrientationMultiSource.png == Summary == Distributes one 2D orientation input to multiple outputs. == Description == The **2D Orientation Multi Source** component takes a single 2D orientation on **In** and replicates it to **N** outputs, where **N** is set by **Output Pins**. All outputs carry the same orientation, and any change at the input is propagated to every output. <b>Diagram:</b> Image:TArduino2DOrientationMultiSource.Preview.png..." current
• 07:2407:24, 15 August 2025 diff hist 0 N File:TArduino2DOrientationMultiSource.Preview.png No edit summary current
• 07:2107:21, 15 August 2025 diff hist +1,468 N Remember 2D Orientation Value Created page with "Image:TArduinoRemember2DOrientationValue.png == Summary == Stores and recalls a 2D orientation value on command. == Description == The **Remember 2D Orientation Value** component allows you to store the current incoming 2D orientation and later recall it. When a signal is received on **Remember**, the current **In** value is saved internally. When a signal is received on **Recall**, the stored value is sent to **Out**. This is useful in: - **Robotics** – mem..." current
• 07:2007:20, 15 August 2025 diff hist 0 N File:TArduinoRemember2DOrientationValue.Preview.png No edit summary current
• 07:1507:15, 15 August 2025 diff hist +1,281 N 2D Orientation Change Only Created page with "Image:TArduino2DOrientationChangeOnly.png == Summary == Outputs a 2D orientation only when it changes from the previous value. == Description == The **2D Orientation Change Only** component monitors the incoming 2D orientation signal and compares it to the last output value. If the orientation changes, the new value is passed to **Out**; if it remains the same, no output update is sent. This helps prevent unnecessary updates in systems where only changes matter..." current
• 07:1107:11, 15 August 2025 diff hist +1,314 N 3D To 2D Orientation Created page with "Image:TArduino3DTo2DOrientation.png == Summary == Converts a 3D orientation signal into a 2D orientation value. == Description == The **3D To 2D Orientation** component receives a 3D orientation input and translates it into one of four 2D directions (**Go Up**, **Go Right**, **Go Left**, **Go Down**). The initial state is defined by the **Initial Value** property and will be output until the first 3D input update is processed. This component is useful in: - **Ro..." current
• 07:1007:10, 15 August 2025 diff hist 0 N File:TArduino3DTo2DOrientation.Preview.png No edit summary current
• 07:0607:06, 15 August 2025 diff hist +211 2D Orientation Value No edit summary current
• 07:0207:02, 15 August 2025 diff hist +1,129 N 2D Orientation Snapshot Created page with "Image:TArduino2DOrientationSnapshot.png == Summary == Captures and holds a 2D orientation value on a snapshot trigger. == Description == The **2D Orientation Snapshot** component stores the orientation present at its **In** pin when the **Snapshot** pin is triggered. The stored value is held and output continuously until another snapshot event occurs. This is useful for “freezing” the orientation state at a specific moment in time for further processing or..." current
• 07:0107:01, 15 August 2025 diff hist 0 N File:TArduino2DOrientationSnapshot.Preview.png No edit summary current
• 06:4206:42, 15 August 2025 diff hist +1,311 N 2D Orientation Value Created page with "Image:TArduino2DOrientationValue.png == Summary == Generates a fixed 2D orientation signal with optional state-change control. == Description == The **2D Orientation Value** component outputs a constant orientation state, selectable from four directions (**Go Up**, **Go Right**, **Go Left**, **Go Down**). It supports configurable element actions, allowing orientation changes to be triggered by a clock signal or set directly in sequence control applications. <b>D..."
• 06:3806:38, 15 August 2025 diff hist 0 N File:TArduino2DOrientationValue.Preview.png No edit summary current
• 06:1006:10, 15 August 2025 diff hist +1,673 N Compare Integer 64 bit Range Created page with "Image:TArduinoInteger64CompareRange.png == Summary == Checks whether a 64-bit integer input is within or outside a specified range. == Description == The **Compare Integer Range (Int64)** component monitors the incoming 64-bit integer on **In** and determines whether it falls inside or outside the configured **Range Min** and **Range Max** values. You can configure whether the range check includes the limits and whether the output should be active when the value..." current
• 06:0906:09, 15 August 2025 diff hist 0 N File:TArduinoInteger64CompareRange.Preview.png No edit summary current
• 06:0706:07, 15 August 2025 diff hist +1,627 N Compare Integer Range Created page with "Image:TArduinoIntegerCompareRange.png == Summary == Checks whether an integer input is within or outside a specified range. == Description == The **Compare Integer Range** component monitors the incoming integer on **In** and determines whether it falls inside or outside the configured **Range Min** and **Range Max** values. You can configure whether the range check includes the limits and whether the output should be active when the value is outside the range...." current
• 06:0406:04, 15 August 2025 diff hist 0 N File:TArduinoIntegerCompareRange.Preview.png No edit summary current