Speed To Clock/Direction(Stepper Driver)

From Visuino
Revision as of 12:42, 9 June 2022 by Visuino (talk | contribs) (Created page with "Image:TArduinoSpeedToClock.png == Summary == {{:Summaries:Summary Speed To Clock/Direction(Stepper Driver)}} == Description == Use this component to convert a normalized speed (0.0 to 1.0) to direction and clock. It is usually used to drive stepper motors with a direction and clock based on desired speed. <b>Diagram:</b> Image:TArduinoSpeedToClock.Preview.png == Categories == *Image:TArduinoAnalogToolbarCategory.png Category Converters/Analog - {{:Su...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

TArduinoSpeedToClock.png

Summary

Converts a normalized speed to direction and clock

Description

Use this component to convert a normalized speed (0.0 to 1.0) to direction and clock. It is usually used to drive stepper motors with a direction and clock based on desired speed.

Diagram:

TArduinoSpeedToClock.Preview.png

Categories

Properties

Pins

  • Clock - The Clock Output pin of the component or element
  • Direction - The Direction Digital Output pin of the component
  • In - The Analog Input pin of the component or element