U-Blox M8 GPS (Serial)
File:TArduino UBlox M8 GPS Serial.png
Summary
This component interfaces with a U-Blox M8 GPS module using a serial (UART) connection. It processes raw satellite data to provide comprehensive navigation information.
Description
The U-Blox M8 GPS (Serial) component reads data from the GPS module via a serial port. It is designed to parse standard NMEA sentences or proprietary UBX messages to extract useful information. This includes geographical location, precise time, speed, altitude, and detailed satellite data.
Diagram:
Properties
- Enabled – Enables or disables the component.
- Base Year – Sets the base year (e.g., 2000) for correct date interpretation.
Pins
Input Pins
- In – Connects to the TX pin of the GPS module for receiving serial data.
- Reset (clock) – A clock signal on this pin will reset the component.
Output Pins
- Location – Outputs the current geographical coordinates.
- Date/Time – Outputs the UTC date and time.
- Altitude – Outputs the altitude in meters.
- Speed – Outputs the ground speed.
- Course – Outputs the heading or direction of movement.
- Satellites – Provides data on the number and status of satellites in view.
- Connected – Digital pin that is high when the GPS has a valid fix.
Categories
- File:TArduinoSensorsCategory.png – Components for interfacing with sensors.
- File:TArduinoCommunicationsCategory.png – Components for data communication.
