Main public logs

Combined display of all available logs of Visuino. You can narrow down the view by selecting a log type, the username (case-sensitive), or the affected page (also case-sensitive).

• 11:34, 15 September 2025 Visuino talk contribs uploaded File:TArduinoFingerprintScanner.Preview.png
• 11:30, 15 September 2025 Visuino talk contribs created page Humidity and Thermometer Sensirion HTS221(SPI) (Created page with "Image:TArduinoHTS221.png == Summary == SPI humidity and temperature sensor with configurable averaging, data ready signals, and heater control. == Description == The Sensirion HTS221 component is a capacitive digital humidity and temperature sensor with SPI interface. It features configurable averaging for both humidity and temperature measurements, data ready signaling, integrated heater, and multiple power modes. The sensor provides high accuracy humidity and tem...")
• 11:28, 15 September 2025 Visuino talk contribs created page File:TArduinoHTS221SPI.Preview.png
• 11:28, 15 September 2025 Visuino talk contribs uploaded File:TArduinoHTS221SPI.Preview.png
• 11:13, 15 September 2025 Visuino talk contribs created page Timeout Timer (Created page with "Image:TArduinoTimeoutTimer.png == Summary == Configurable timeout timer with microsecond precision, supporting start/cancel control and interval-based triggering. == Description == The Timeout Timer component provides precise timing functionality with configurable intervals in microsecond resolution. It features start and cancel control inputs, microsecond timing capability, and flexible interval settings. The timer can be used for timeout operations, periodic trig...")
• 11:11, 15 September 2025 Visuino talk contribs created page File:TArduinoTimeoutTimer.Preview.png
• 11:11, 15 September 2025 Visuino talk contribs uploaded File:TArduinoTimeoutTimer.Preview.png
• 08:46, 15 September 2025 Visuino talk contribs created page Infrared Remote Receiver (Created page with "Image:TArduinoInfraredReceiver.png == Summary == Infrared remote control receiver supporting multiple protocols including NEC, RC-5, RC-6, and various manufacturer-specific codes with configurable decoding options. == Description == The Infrared Remote Receiver component detects and decodes infrared signals from various remote controls using multiple protocol standards. It supports NEC, RC-5, RC-6, Panasonic, JVC, Samsung, Whynter, Aiwa, LG, Sanyo, Mitsubishi, DISH...")
• 08:45, 15 September 2025 Visuino talk contribs created page File:TArduinoInfraredReceiver.Preview.png
• 08:45, 15 September 2025 Visuino talk contribs uploaded File:TArduinoInfraredReceiver.Preview.png
• 08:40, 15 September 2025 Visuino talk contribs created page Grove Software Serial Port (Created page with "Image:TArduinoGroveSoftwareSerial.png == Summary == Grove-connected software serial port providing additional serial communication channels with configurable timing and break signals. == Description == The Grove Software Serial Port component implements a software-based serial communication interface through Grove connectivity. It enables additional serial channels beyond hardware UART limitations, featuring configurable baud rates, timing parameters, and break sig...")
• 08:39, 15 September 2025 Visuino talk contribs created page File:TArduinoGroveSoftwareSerial.Preview.png
• 08:39, 15 September 2025 Visuino talk contribs uploaded File:TArduinoGroveSoftwareSerial.Preview.png
• 08:35, 15 September 2025 Visuino talk contribs created page M5Stack RS485 to TTL Unit (Grove) (Created page with "Image:TArduinoM5StackRS485.png == Summary == Grove-connected RS485 to TTL conversion unit enabling robust long-distance serial communication with configurable timing and break signals. == Description == The M5Stack RS485 to TTL Unit component provides bidirectional conversion between RS485 differential signaling and TTL-level serial communication. It features configurable baud rates, send/receive timing control, and break signal generation for robust industrial com...")
• 08:35, 15 September 2025 Visuino talk contribs created page File:TArduinoM5StackRS485.Preview.png
• 08:35, 15 September 2025 Visuino talk contribs uploaded File:TArduinoM5StackRS485.Preview.png
• 08:15, 15 September 2025 Visuino talk contribs created page Heart Rate Bluetooth Service (Created page with "Image:TArduinoHeartRateBluetoothService.png == Summary == Bluetooth Heart Rate Service component implementing the standard BLE heart rate profile with configurable sensor location and energy expenditure tracking. == Description == The Heart Rate Bluetooth Service component provides a complete implementation of the Bluetooth SIG Heart Rate Service profile. It supports heart rate measurement, sensor contact detection, and energy expenditure calculation. The component...")
• 08:14, 15 September 2025 Visuino talk contribs created page File:TArduinoHeartRateBluetoothService.Preview.png
• 08:14, 15 September 2025 Visuino talk contribs uploaded File:TArduinoHeartRateBluetoothService.Preview.png
• 08:11, 15 September 2025 Visuino talk contribs created page Renault Kangoo Battery Source/Simulator (CanBus) (Created page with "Image:TArduinoRenaultKangooBatterySimulator.png == Summary == CAN bus battery simulator for Renault Kangoo electric vehicles, generating simulated cell voltage and temperature data for testing purposes. == Description == The Renault Kangoo Battery Source/Simulator component generates simulated battery data for Renault Kangoo electric vehicles through CAN bus communication. It creates artificial cell voltage readings, temperature data, and battery status information...")
• 08:10, 15 September 2025 Visuino talk contribs created page File:TArduinoRenaultKangooBatterySimulator.Preview.png
• 08:10, 15 September 2025 Visuino talk contribs uploaded File:TArduinoRenaultKangooBatterySimulator.Preview.png
• 08:07, 15 September 2025 Visuino talk contribs created page Renault Kangoo Battery (CanBus) (Created page with "Image:TArduinoRenaultKangooBattery.png == Summary == CAN bus battery monitoring system for Renault Kangoo electric vehicles, providing cell voltage and temperature data. == Description == The Renault Kangoo Battery component monitors the battery system of Renault Kangoo electric vehicles through CAN bus communication. It provides individual cell voltage monitoring, temperature sensing, and overall battery health status. The component tracks highest and lowest cell...")
• 08:06, 15 September 2025 Visuino talk contribs created page File:TArduinoRenaultKangooBattery.Preview.png
• 08:06, 15 September 2025 Visuino talk contribs uploaded File:TArduinoRenaultKangooBattery.Preview.png
• 06:48, 15 September 2025 Visuino talk contribs created page CAN bus Value (Created page with "Image:TArduinoCANbusValue.png == Summary == CAN bus value component for transmitting and receiving specific data values over CAN bus with configurable message parameters. == Description == The CAN bus Value component enables transmission and reception of specific data values over a Controller Area Network (CAN) bus. It supports configurable message IDs, extended frame formats, and remote transmission requests. The component allows precise control over CAN message c...")
• 06:47, 15 September 2025 Visuino talk contribs created page File:TArduinoCANbusValue.Preview.png
• 06:47, 15 September 2025 Visuino talk contribs uploaded File:TArduinoCANbusValue.Preview.png
• 06:25, 15 September 2025 Visuino talk contribs created page CAN bus Multi-Source Merger (Created page with "Image:TArduinoCANBusMultiSourceMerger.png == Summary == Merges multiple CAN bus input signals into a single output channel. == Description == The **CAN bus Multi-Source Merger** component combines multiple CAN bus inputs into one unified output. This is useful when multiple CAN bus sources need to be routed to the same processing or transmission channel. The number of available input pins can be configured through the **Input Pins** property. <b>Diag...")
• 06:25, 15 September 2025 Visuino talk contribs created page File:TArduinoCANBusMultiSourceMerger.Preview.png
• 06:25, 15 September 2025 Visuino talk contribs uploaded File:TArduinoCANBusMultiSourceMerger.Preview.png
• 06:22, 15 September 2025 Visuino talk contribs created page M5Stack I2C Hub 1 to 6 Expansion Unit (TCA9548A) (Created page with "Image:TArduinoM5StackI2CHub.png == Summary == 6-channel I2C hub enabling multiple Grove I2C devices to share a single bus with individual channel selection. == Description == The M5Stack I2C Hub component is a 6-channel I2C switch based on TCA9548A that allows up to 6 Grove I2C devices to share a single I2C bus. Each Grove port can be individually selected and controlled, preventing address conflicts and enabling efficient bus management. The hub features low stand...")
• 06:20, 15 September 2025 Visuino talk contribs created page File:TArduinoM5StackI2CHub.Preview.png
• 06:20, 15 September 2025 Visuino talk contribs uploaded File:TArduinoM5StackI2CHub.Preview.png
• 06:17, 15 September 2025 Visuino talk contribs created page 8-Channel I2C Switch TCA9548A (Created page with "Image:TArduinoTCA9548A.png == Summary == 8-channel I2C switch enabling multiple I2C devices to share a single bus with individual channel selection. == Description == The TCA9548A component is an I2C switch that allows up to 8 I2C devices to share a single I2C bus. Each channel can be individually selected and controlled, preventing address conflicts and enabling efficient bus management. The switch features low standby current, power-on reset function, and support...")
• 06:17, 15 September 2025 Visuino talk contribs created page File:TArduinoTCA9548A.Preview.png
• 06:17, 15 September 2025 Visuino talk contribs uploaded File:TArduinoTCA9548A.Preview.png
• 06:01, 15 September 2025 Visuino talk contribs created page RFID MFRC522/WS1850S (SPI) (Created page with "Image:TArduinoMFRC522_SPI.png == Summary == SPI RFID reader/writer supporting MIFARE and ISO/IEC 14443 Type A protocols with configurable antenna gain and communication parameters. == Description == The MFRC522/WS1850S SPI component is a highly integrated RFID reader IC for 13.56MHz contactless communication. It features configurable antenna gain, multiple modulation schemes, CRC error detection, and support for MIFARE Classic and ISO/IEC 14443 Type A protocols. Th...")
• 06:01, 15 September 2025 Visuino talk contribs created page File:TArduinoMFRC522 SPI.Preview.png
• 06:01, 15 September 2025 Visuino talk contribs uploaded File:TArduinoMFRC522 SPI.Preview.png
• 05:54, 15 September 2025 Visuino talk contribs created page M5Stack RFID Unit MFRC522/RFID 2 Unit WS1850S (Created page with "Image:TArduinoM5StackRFIDUnit.png == Summary == I2C RFID reader/writer module supporting MIFARE and ISO/IEC 14443 Type A protocols with configurable antenna gain, collision detection, and low-power operation. == Description == The M5Stack RFID Unit MFRC522/RFID 2 Unit WS1850S is a highly integrated RFID reader IC designed for 13.56MHz contactless communication. It provides configurable antenna gain, multiple modulation schemes, CRC error detection, and full support...")
• 05:53, 15 September 2025 Visuino talk contribs created page File:TArduinoM5StackRFIDUnit.Preview.png
• 05:53, 15 September 2025 Visuino talk contribs uploaded File:TArduinoM5StackRFIDUnit.Preview.png
• 05:48, 15 September 2025 Visuino talk contribs created page RFID MFRC522/WS1850S (I2C) (Created page with "Image:TArduinoMFRC522.png == Summary == I2C RFID reader/writer supporting MIFARE and ISO/IEC 14443 Type A protocols with configurable antenna gain and communication parameters. == Description == The MFRC522/WS1850S component is a highly integrated RFID reader IC for 13.56MHz contactless communication. It features configurable antenna gain, multiple modulation schemes, CRC error detection, and support for MIFARE Classic and ISO/IEC 14443 Type A protocols. The compon...")
• 05:45, 15 September 2025 Visuino talk contribs created page File:TArduinoMFRC522.Preview.png
• 05:45, 15 September 2025 Visuino talk contribs uploaded File:TArduinoMFRC522.Preview.png
• 05:35, 15 September 2025 Visuino talk contribs created page SX1261 LoRa/FSK (Created page with "Image:TArduinoSX1261.png == Summary == Dual-mode LoRa/FSK long-range transceiver with configurable modulation schemes, advanced packet handling, and ultra-low-power operation. == Description == The SX1261 component is a high-performance sub-GHz transceiver supporting both LoRa and FSK modulation schemes. It features configurable frequency bands, multiple spreading factors, adjustable output power, and advanced packet handling with CRC and whitening options. The SX1...")
• 05:34, 15 September 2025 Visuino talk contribs created page File:TArduinoSX1261.Preview.png
• 05:34, 15 September 2025 Visuino talk contribs uploaded File:TArduinoSX1261.Preview.png
• 05:30, 15 September 2025 Visuino talk contribs created page SX1262 LoRa/FSK (Created page with "Image:TArduinoSX1262.png == Summary == Dual-mode LoRa/FSK long-range transceiver with configurable modulation schemes, advanced packet handling, and low-power operation. == Description == The SX1262 component is a high-performance sub-GHz transceiver supporting both LoRa and FSK modulation schemes. It features configurable frequency bands, multiple spreading factors, adjustable output power up to 22dBm, and advanced packet handling with CRC and whitening options. T...")