Main public logs

Combined display of all available logs of Visuino. You can narrow down the view by selecting a log type, the username (case-sensitive), or the affected page (also case-sensitive).

• 08:52, 7 September 2025 Visuino talk contribs created page File:TArduino UBlox M8 GPS Serial.Preview.png
• 08:52, 7 September 2025 Visuino talk contribs uploaded File:TArduino UBlox M8 GPS Serial.Preview.png
• 08:51, 7 September 2025 Visuino talk contribs created page U-Blox M8 GPS (I2C) (Created page with "Image:TArduino_UBlox_M8_GPS_I2C.png == Summary == This component interfaces with a U-Blox M8 GPS module over the I2C communication protocol. It processes satellite data to provide location, time, speed, and other navigation information. == Description == The U-Blox M8 GPS (I2C) component allows for easy integration of a high-precision GPS module. It communicates using the I2C bus, minimizing the number of required pins. The component decodes messages from the GPS t...")
• 08:43, 7 September 2025 Visuino talk contribs created page File:TArduino UBlox M8 GPS I2C.Preview.png
• 08:43, 7 September 2025 Visuino talk contribs uploaded File:TArduino UBlox M8 GPS I2C.Preview.png
• 04:40, 7 September 2025 Visuino talk contribs created page Ignore Analog Ranges (Created page with "Image:TArduinoIgnoreAnalogRanges.png == Summary == Analog filter module that ignores values within defined ranges. Supports multiple range elements with configurable minimum/maximum limits and equality handling. == Description == The Ignore Analog Ranges module processes an incoming analog signal and filters out values that fall within user-defined ranges. Each range can specify minimum and maximum thresholds, with options to pass or block values equal to tho...")
• 04:39, 7 September 2025 Visuino talk contribs created page File:TArduinoIgnoreAnalogRanges.Preview.png
• 04:39, 7 September 2025 Visuino talk contribs uploaded File:TArduinoIgnoreAnalogRanges.Preview.png
• 04:35, 7 September 2025 Visuino talk contribs created page Analog Integrator(Integral) (Created page with "Image:TArduinoAnalogIntegrator.png == Summary == Analog integrator module that accumulates values over time. Supports reset, initial value, min/max limits, and configurable element actions. == Description == The Analog Integrator (Integral) module integrates incoming analog values over time, triggered by a clock signal. It allows adding or setting values through elements, with support for limits (min/max) and rollover behavior. A reset pin clears the integr...")
• 04:35, 7 September 2025 Visuino talk contribs created page File:TArduinoAnalogIntegrator.Preview.png
• 04:35, 7 September 2025 Visuino talk contribs uploaded File:TArduinoAnalogIntegrator.Preview.png
• 04:28, 7 September 2025 Visuino talk contribs created page Analog Differentiator(Delta Change) (Created page with "Image:TArduinoAnalogDifferentiator.png == Summary == Analog differentiator module that outputs the rate of change (delta) of an input signal. == Description == The Analog Differentiator (Delta Change) module calculates the difference between successive analog input values. Triggered by the clock pin, it provides the delta change as an analog output. This is useful for detecting trends, slopes, or rapid changes in sensor signals. <b>Diagram:</b> Image:TA...")
• 04:28, 7 September 2025 Visuino talk contribs created page File:TArduinoAnalogDifferentiator.Preview.png
• 04:28, 7 September 2025 Visuino talk contribs uploaded File:TArduinoAnalogDifferentiator.Preview.png
• 04:26, 7 September 2025 Visuino talk contribs created page Interpolate Analog (Created page with "Image:TArduinoInterpolateAnalog.png == Summary == Analog interpolation module for mapping input values to defined output ranges. Supports adding multiple interpolation elements with customizable input-output pairs. == Description == The Interpolate Analog module allows analog input values to be mapped to different output values using interpolation. By adding elements in the interpolation table, each with defined input and output properties, the module can smo...")
• 04:26, 7 September 2025 Visuino talk contribs created page File:TArduinoInterpolateAnalog.Preview.png
• 04:26, 7 September 2025 Visuino talk contribs uploaded File:TArduinoInterpolateAnalog.Preview.png
• 04:18, 7 September 2025 Visuino talk contribs created page Ignore Analog Values (Created page with "Image:TArduinoIgnoreAnalogValues.png == Summary == Module to filter and ignore certain analog values. Supports blocking repeated values, values below a threshold, or both. == Description == The Ignore Analog Values module processes incoming analog signals and filters them based on configurable conditions. It can block equal consecutive values, ignore values below a defined threshold, or pass all values if enabled. Useful for reducing noise or redundant data...")
• 06:56, 6 September 2025 Visuino talk contribs created page Thermistor Steinhart Hart (Created page with "Image:TArduinoThermistorSteinhartHart.png == Summary == Steinhart-Hart thermistor module for precise temperature measurement. Calculates temperature using Steinhart-Hart coefficients with optional Fahrenheit conversion. == Description == The Thermistor Steinhart-Hart module converts analog resistance readings into temperature using the Steinhart-Hart equation with coefficients A, B, and C. It supports an optional fixed resistor for a voltage divider, conversi...")
• 06:56, 6 September 2025 Visuino talk contribs created page File:TArduinoThermistorSteinhartHart.Preview.png
• 06:56, 6 September 2025 Visuino talk contribs uploaded File:TArduinoThermistorSteinhartHart.Preview.png
• 06:50, 6 September 2025 Visuino talk contribs created page Thermistor Steinhart Hart - 3 Points (Created page with "Image:TArduinoThermistor3Points.png == Summary == 3-point Steinhart-Hart thermistor module for precise temperature measurement. Converts analog resistance readings to temperature with optional Fahrenheit units. == Description == The Thermistor Steinhart-Hart module uses three reference points to calculate temperature based on thermistor resistance. It supports an optional fixed resistor for voltage divider configuration, conversion to Fahrenheit, and a choice...")
• 06:50, 6 September 2025 Visuino talk contribs created page File:TArduinoThermistor3Points.Preview.png
• 06:50, 6 September 2025 Visuino talk contribs uploaded File:TArduinoThermistor3Points.Preview.png
• 05:59, 6 September 2025 Visuino talk contribs created page Dataq YF-S201 Flow Sensor (Created page with "Image:TArduinoYFS201FlowSensor.png == Summary == Water flow sensor (YF-S201) that measures flow rate in liters per minute. Provides an analog output proportional to flow and supports configurable minimum frequency. == Description == The Dataq YF-S201 Flow Sensor detects the flow rate of liquids using a hall-effect sensor and turbine. It outputs an analog signal representing the flow in liters per minute. The sensor can be enabled or disabled, and the minimu...")
• 05:59, 6 September 2025 Visuino talk contribs created page File:TArduinoYFS201FlowSensor.Preview.png
• 05:59, 6 September 2025 Visuino talk contribs uploaded File:TArduinoYFS201FlowSensor.Preview.png
• 05:56, 6 September 2025 Visuino talk contribs created page Sharp Reflective Optical Distance Meter GP2Y0A02YK0F/GP2Y0A21YK0F/GP2Y0A710K0F/GP2YA41SK0F (Created page with "Image:TArduinoSharpDistanceSensor.png == Summary == Reflective optical distance sensors from Sharp (GP2Y0A series). Measures distance with analog output and supports selectable sensor types and units. == Description == The Sharp Reflective Optical Distance Meter provides distance measurements using an infrared emitter and phototransistor. It supports multiple sensor types including GP2Y0A02YK0F, GP2Y0A21YK0F, GP2Y0A710K0F, GP2YA41SK0F, and GP2Y0A51SK0F. Dis...")
• 05:55, 6 September 2025 Visuino talk contribs created page File:TArduinoSharpDistanceMeter.Preview.png
• 05:55, 6 September 2025 Visuino talk contribs uploaded File:TArduinoSharpDistanceMeter.Preview.png
• 05:48, 6 September 2025 Visuino talk contribs created page 6 RGB LEDs Ultrasonic Ranger RUS-04(Ping) (Created page with "Image:TArduino6RGBUltrasonicRUS04.png == Summary == Ultrasonic ranger module with six RGB LEDs. Measures distance and provides visual feedback via left and right LED groups, with analog and digital outputs. == Description == The 6 RGB LEDs Ultrasonic Ranger RUS-04 (Ping) detects distance using ultrasonic pulses. It includes two groups of three RGB LEDs (left and right) for visual indication of distance or status, with adjustable brightness and initial color v...")
• 05:47, 6 September 2025 Visuino talk contribs created page File:TArduino6RGBUltrasonicRangerRUS04.Preview.png
• 05:47, 6 September 2025 Visuino talk contribs uploaded File:TArduino6RGBUltrasonicRangerRUS04.Preview.png
• 05:42, 6 September 2025 Visuino talk contribs created page 6 RGB LEDs Ultrasonic Ranger RUS-04(Ping)(One Pin) (Created page with "Image:TArduino6RGBUltrasonicRUS04.png == Summary == One-pin ultrasonic ranger module with six RGB LEDs. Measures distance and provides visual feedback via left and right LED groups, with analog and digital outputs. == Description == The 6 RGB LEDs Ultrasonic Ranger RUS-04 (Ping) detects distance using ultrasonic pulses on a single pin. It includes two groups of three RGB LEDs (left and right) for visual indication of distance or status, with adjustable bright...")
• 05:41, 6 September 2025 Visuino talk contribs created page File:TArduino6RGBUltrasonicRUS04.Preview.png
• 05:41, 6 September 2025 Visuino talk contribs uploaded File:TArduino6RGBUltrasonicRUS04.Preview.png
• 05:25, 6 September 2025 Visuino talk contribs created page RGB Ultrasonic Ranger(Ping) (Created page with "Image:TArduinoRGBUltrasonicPing.png == Summary == RGB ultrasonic ranger module (Ping) with integrated LEDs. Measures distance and provides visual feedback via left and right RGB LEDs, with analog and single digital output. == Description == The RGB Ultrasonic Ranger (Ping) detects distance using ultrasonic pulses on a single pin. It includes two RGB LEDs (left and right) for visual indication of distance or status, with adjustable brightness and initial color...")
• 05:25, 6 September 2025 Visuino talk contribs created page File:TArduinoRGBUltrasonicRangerPing.Preview.png
• 05:25, 6 September 2025 Visuino talk contribs uploaded File:TArduinoRGBUltrasonicRangerPing.Preview.png
• 05:20, 6 September 2025 Visuino talk contribs created page RGB Ultrasonic Ranger/Yahboom YB-MVU05(Ping)(One Pin) (Created page with "Image:TArduinoRGBUltrasonicPing.png == Summary == One-pin RGB ultrasonic ranger module with integrated LEDs. Measures distance and provides visual feedback via left and right RGB LEDs, with analog and single digital output. == Description == The RGB Ultrasonic Ranger (Yahboom YB-MVU05) detects distance using ultrasonic pulses on a single pin. It includes two RGB LEDs (left and right) for visual indication of distance or status, with adjustable brightness and...")
• 05:20, 6 September 2025 Visuino talk contribs created page File:TArduinoRGBUltrasonicPing.Preview.png
• 05:20, 6 September 2025 Visuino talk contribs uploaded File:TArduinoRGBUltrasonicPing.Preview.png
• 04:04, 6 September 2025 Visuino talk contribs created page M5Stack Ultrasonic Ranger(Ping) Unit (Grove) (Created page with "Image:TArduinoM5UltrasonicGrove.png == Summary == Ultrasonic ranger unit using I2C interface (Grove compatible). Provides distance measurements with analog and digital outputs, and supports configurable units. == Description == The M5Stack Ultrasonic Ranger (Ping) Unit measures distance using ultrasonic pulses and communicates via I2C. It provides analog output for distance, digital indication for out-of-range measurements, and a sensor I2C output for reading...")
• 04:04, 6 September 2025 Visuino talk contribs created page File:TArduinoM5UltrasonicGrove.Preview.png
• 04:04, 6 September 2025 Visuino talk contribs uploaded File:TArduinoM5UltrasonicGrove.Preview.png
• 03:54, 6 September 2025 Visuino talk contribs created page Ultrasonic Ranger(Ping)(One Pin) (Created page with "Image:TArduinoUltrasonicPing.png == Summary == One-pin ultrasonic ranger module for distance measurement. Provides analog output for distance, digital timeout indicator, and ping trigger/echo control. == Description == The Ultrasonic Ranger (Ping) module measures distance using ultrasonic pulses. It uses a single pin for triggering and receiving echoes. The module can be enabled or disabled, and includes configurable pause time, ping time, timeout, and outp...")
• 03:54, 6 September 2025 Visuino talk contribs created page File:TArduinoUltrasonicPing.Preview.png
• 03:54, 6 September 2025 Visuino talk contribs uploaded File:TArduinoUltrasonicPing.Preview.png
• 03:53, 6 September 2025 Visuino talk contribs created page Analog Apply Window (Created page with "Image:TArduinoAnalogApplyWindow.png == Summary == Applies a mathematical window function to an analog array signal. Supports multiple window types commonly used in signal processing. == Description == The Analog Apply Window component modifies an analog array by applying a window function. Windowing is used in signal processing to reduce spectral leakage before performing operations such as Fourier Transforms. The component supports various window types, adju...")
• 03:48, 6 September 2025 Visuino talk contribs created page File:TArduinoAnalogApplyWindow.Preview.png