Main public logs

Combined display of all available logs of Visuino. You can narrow down the view by selecting a log type, the username (case-sensitive), or the affected page (also case-sensitive).

15:47, 10 June 2022 Visuino talk contribs created page Indexed 2D Pixel (Maxim LED Control).InitialIndexY (Created page with "== Summary == {{:Summaries:Summary Indexed 2D Pixel (Maxim LED Control).InitialIndexY}} == Description == Use this property to specify the initial pixel Y index when Arduino is powered up. This index will be controlled by the Color input pin immediately after Arduino is powered up, until a new value is received on the Y Index Input Pin")
15:47, 10 June 2022 Visuino talk contribs created page Integer Element (Formatted Text).InputPin (Created page with "{{:Embedded:InputPin Integer}}")
15:47, 10 June 2022 Visuino talk contribs created page Mathematics Package One (Created page with " Image:math_pack1.png == Summary == {{:Summaries:Summary Software Serial Port}} == Description == Add this component to use functions from the default library of C <math.h> in your Visuino. * ACOS; * ASIN; * ATAN; * COSH; * SINH; * TANH; * LOG; * LOG10; * SQRT (Square Root); * CEIL; * FABS; * FLOOR * EXP Diagram: Image:Math_package_diagram.png == Categories == *Image:swellington_category.png Category Swellington - {{:Summaries:Summary Category...")
15:47, 10 June 2022 Visuino talk contribs created page Maxim(Dallas) 1-Wire Thermometer (DS1820/DS18S20/DS18B20) (Created page with "Image:TArduinoMaximOneWireThermometer.png == Summary == {{:Summaries:Summary Maxim(Dallas) 1-Wire Thermometer (DS1820/DS18S20/DS18B20)}} == Description == Use this component to read data from Maxim 1-Wire thermometer. Resources: [http://www.instructables.com/id/Arduino-Nano-Using-DS1820DS18S20-Maxim-One-Wire-Th/ Instructable: Arduino Nano: Using DS1820/DS18S20 Maxim One Wire Thermometer Sensor Module] [http://www.instructables.com/id/Arduino-Nano-Read...")
15:46, 10 June 2022 Visuino talk contribs created page RGBW Color On/Off Switch (Created page with "Image:TArduinoRGBWColorSwitch.png == Summary == {{:Summaries:Summary RGBW Color On/Off Switch}} == Description == Add this component to Enable or Disable the signal from the RGBW Color input to be sent to the output. Diagram: Image:TArduinoRGBWColorSwitch.Preview.png == Categories == *Image:TColorToolbarCategory.png Category Color - {{:Summaries:Summary Category Color}} == Properties == *RGBW Color On/Off Switch.InitialEnabled|InitialEnable...")
15:46, 10 June 2022 Visuino talk contribs created page Integer Array (Created page with "Image:TArduinoIntegerValueArray.png == Summary == {{:Summaries:Summary Integer Array}} == Description == Use this component to define array of Integer Values. Diagram: Image:TArduinoIntegerValueArray.Preview.png == Categories == *Image:TArduinoIntegerToolbarCategory.png Category Data Sources/Integer - {{:Summaries:Summary Category Data Sources/Integer}} *Image:TArduinoIntegerToolbarCategory.png Category Integer - {{:Summaries:Summary C...")
15:46, 10 June 2022 Visuino talk contribs created page NeoPixels.Brightness (Created page with "== Summary == {{:Summaries:Summary NeoPixels.Brightness}} == Description == Use this property to specify the brightness of the LEDs.")
15:46, 10 June 2022 Visuino talk contribs created page LED Bar Display.Enabled (Created page with "== Summary == {{:Summaries:Summary LED Bar Display.Enabled}} == Description == Use this property to Enable or Disable the LED bar display. If the display is disabled, all LEDs will be off.")
15:45, 10 June 2022 Visuino talk contribs created page Microchip SPI Digital To Analog Converter (DAC) - MCP4801 ot MCP4922.LatchOutputPin (Created page with "== Summary == {{:Summaries:Summary Microchip SPI Digital To Analog Converter (DAC) - MCP4801 ot MCP4922.LatchOutputPin}} == Description == Connect this pin to the Arduino pin controlling the Latch pin of the Microchip DAC. This pin will control the moment the DAC should output the new value.")
15:45, 10 June 2022 Visuino talk contribs created page LEGO RCX Light Sensor.MaxValue (Created page with "== Summary == {{:Summaries:Summary LEGO RCX Light Sensor.MaxValue}} == Description == Use this property to specify the Maximal Sensor Value for the normalization.")
15:45, 10 June 2022 Visuino talk contribs created page Limit between Min and Max.Min (Created page with "== Summary == {{:Summaries:Summary Limit between Min and Max.Min}} == Description == Use this property to specify the minimal limit value.")
15:44, 10 June 2022 Visuino talk contribs created page Mixers (Created page with "== Summary == {{:Summaries:Summary Mixers}} == Description == Category for all Mixer components.")
15:44, 10 June 2022 Visuino talk contribs created page Maxim(Dallas) 1-Wire Thermometer (DS1820/DS18S20/DS18B20).AddressOutputPin (Created page with "== Summary == {{:Summaries:Summary Maxim(Dallas) 1-Wire Thermometer (DS1820/DS18S20/DS18B20).AddressOutputPin}} == Description == You can connect this pin to any other pin that can accept Text data. Once the Address of the Thermometer has been discovered, it will be sent on this pin.")
15:44, 10 June 2022 Visuino talk contribs created page Pressure Temperature Humidity BME280 SPI (Created page with "Image:TArduinoPressureTemperatureHumidityBME280SPI.png == Summary == {{:Summaries:Summary Pressure Temperature Humidity BME280 SPI}} == Description == Add this component to read data from BME280 Barometric Pressure, Temperature and Humidity sensor using SPI interface. Diagram: Image:TArduinoPressureTemperatureHumidityBME280SPI.Preview.png == Categories == *Image:TArduinoAnalogToolbarCategory.png Category Measurement/Analog - {{:Summaries:Summa...")
15:43, 10 June 2022 Visuino talk contribs created page Random Integer Generator.Seed (Created page with "== Summary == {{:Summaries:Summary Random Integer Generator.Seed}} == Description == Use this property to specify the seed for the random generator.")
15:43, 10 June 2022 Visuino talk contribs created page Maxim 1-Wire Thermometer (DS1820/DS18S20/DS18B20).OneWireInputPin (Created page with "== Summary == {{:Summaries:Summary Maxim 1-Wire Thermometer (DS1820/DS18S20/DS18B20).OneWireInputPin}} == Description == You can connect the pins to any other pin that can deliver One Wire data. The One Wire devices usually are connected on a single pin, and they are chained from one to another using the "One Wire" Input, and Output pins.")
15:43, 10 June 2022 Visuino talk contribs created page Pulse Meter.OutputPin (Created page with "{{:Embedded:OutputPin Integer}}")
15:42, 10 June 2022 Visuino talk contribs created page PlayStation 2 Controller.LargeVibrateMotorInputPin (Created page with "== Summary == {{:Summaries:Summary PlayStation 2 Controller.LargeVibrateMotorInputPin}} == Description == This pin controls the speed of the Large Vibrate Motor of the controller. You can connect this pin to any other pin that can deliver Digital( Boolean ) data.")
15:42, 10 June 2022 Visuino talk contribs created page Open WiFi Access Point.SSID (Created page with "== Summary == {{:Summaries:Summary Open WiFi Access Point.SSID}} == Description == Use this property to specify the SSID of the access point.")
15:42, 10 June 2022 Visuino talk contribs created page Integer Display 7 Segments (Maxim LED Control).InitialValue (Created page with "== Summary == {{:Summaries:Summary Integer Display 7 Segments (Maxim LED Control).InitialValue}} == Description == Use this property to specify the initial value of the component. The component will output this value immediately after starting up Arduino until a new value is calculated based on the inputs.")
15:42, 10 June 2022 Visuino talk contribs created page Maxim 1-Wire Thermometer (DS1820/DS18S20/DS18B20).Resolution (Created page with "== Summary == {{:Summaries:Summary Maxim 1-Wire Thermometer (DS1820/DS18S20/DS18B20).Resolution}} == Description == Specifies the resolution to 9, 10, 11, or 12 bits.")
15:41, 10 June 2022 Visuino talk contribs created page Indexed 2D Pixel (Maxim LED Control).IndexInputPins (Created page with "== Summary == {{:Summaries:Summary Indexed 2D Pixel (Maxim LED Control).IndexInputPins}} == Description == You can connect these pins to any other pins that can deliver Integer data. The values received by the pins, will specify the X/Y indexes of the pixel to be controlled.")
15:41, 10 June 2022 Visuino talk contribs created page LED Digits (Created page with "REMOVED!")
15:41, 10 June 2022 Visuino talk contribs created page Maxim Integrated SPI Digital To Analog Converter (DAC) - MAX5214/MAX5216 (Created page with "Image:TArduinoMaximMAX521X.png == Summary == {{:Summaries:Summary Maxim Integrated SPI Digital To Analog Converter (DAC) - MAX5214/MAX5216}} == Description == Use this component to control Maxim MAX5214/MAX5216 type SPI Digital to Analog Converter (DAC). Diagram: Image:TArduinoMaximMAX521X.Preview.png == Categories == *Image:TArduinoAnalogToolbarCategory.png Category Output/Analog - {{:Summaries:Summary Category Output/Analog}} *Image:TArdui...")
15:40, 10 June 2022 Visuino talk contribs created page RGBW Color Mux(Multi channel Switch) (Created page with "Image:TArduinoRGBWColorMux.png == Summary == {{:Summaries:Summary RGBW Color Mux(Multi channel Switch)}} == Description == Use this component to select signal from one of the RGBW Color inputs to be sent to the output. Diagram: Image:TArduinoRGBWColorMux.Preview.png == Categories == *Image:TColorToolbarCategory.png Category Color - {{:Summaries:Summary Category Color}} == Properties == *RGBW Color Mux(Multi channel Switch).InitialChannel|In...")
15:40, 10 June 2022 Visuino talk contribs created page R/C Servo Meter.OutputPin (Created page with "{{:Embedded:OutputPin Analog}}")
15:40, 10 June 2022 Visuino talk contribs created page Integer To Analog.Scale (Created page with "== Summary == {{:Summaries:Summary Integer To Analog.Scale}} == Description == Use this property to specify the scale factor for the conversion. The output is calculated by multiplying the input by the scale factor. If the scale factor is 1.0, the input signal will not be scaled, and will have the same value as the input.")
15:39, 10 June 2022 Visuino talk contribs created page L9110S Dual Motor Driver (Created page with "Image:TArduinoL9110SDualMotorDriver.png == Summary == {{:Summaries:Summary L9110S Dual Motor Driver}} == Description == Use this component to control a L9110S Dual Motor Driver board. Resources: [http://www.instructables.com/id/Arduino-Nano-Control-Brushelss-DC-Motor-With-L9110/ Instructables: Arduino Nano: Control Brushed DC Motor with L9110S Driver Board and Visuino] Diagram: Image:TArduinoL9110SDualMotorDriver.Preview.png == Categories...")
15:39, 10 June 2022 Visuino talk contribs created page Maxim Integrated SPI Digital To Analog Converter (DAC) - MAX5214/MAX5216.InputPin (Created page with "{{:Embedded:InputPin Analog}}")
15:39, 10 June 2022 Visuino talk contribs created page LED Bar Analog Display.InvertedBars (Created page with "== Summary == {{:Summaries:Summary LED Bar Analog Display.InvertedBars}} == Description == Use this property to specify if the bars are binary inverted.")
15:38, 10 June 2022 Visuino talk contribs created page Liquid Crystal Display (LCD) - I2C (Created page with "Image:TArduinoLiquidCrystalDisplayI2C.png == Summary == {{:Summaries:Summary Liquid Crystal Display (LCD) - I2C}} == Description == Use this component to control Text Liquid Crystal Display with I2C interface. Resources: [http://www.instructables.com/id/Arduino-Nano-I2C-2-X-16-LCD-Display-With-Visuino/ Instructable: Arduino Nano: I2C 2 X 16 LCD Display With Visuino] [http://www.instructables.com/id/Arduino-Nano-DHT11-Temperature-an-Humidity-I2C-2-X/ I...")
15:38, 10 June 2022 Visuino talk contribs created page Indexed Pixel.InitialIndex (Created page with "== Summary == {{:Summaries:Summary Indexed Pixel.InitialIndex}} == Description == Use this property to specify the initial pixel index when Arduino is powered up. This index will be controlled by the Color input pin immediately after Arduino is powered up, until a new value is received on the Index Input Pin")
15:37, 10 June 2022 Visuino talk contribs created page Packet.HeadMarker (Created page with "== Summary == {{:Summaries:Summary Packet.HeadMarker}} == Description == Use this property to specify the Head Marker bytes. The head marker contains unique set of bytes. It is repeated 2 times at the beginning of each packet, and this sequence is guaranteed to be unique in the packet by special algorithm.")
15:37, 10 June 2022 Visuino talk contribs created page Indexed Pixel (Created page with "REMOVED!")
15:37, 10 June 2022 Visuino talk contribs created page Maxim(Dallas) 1-Wire Thermometer (DS1820/DS18S20/DS18B20).OneWireInputPin (Created page with "== Summary == {{:Summaries:Summary Maxim(Dallas) 1-Wire Thermometer (DS1820/DS18S20/DS18B20).OneWireInputPin}} == Description == You can connect the pins to any other pin that can deliver One Wire data. The One Wire devices usually are connected on a single pin, and they are chained from one to another using the "One Wire" Input, and Output pins.")
15:36, 10 June 2022 Visuino talk contribs created page Maxim 1-Wire Thermometer.AlarmOutputPin (Created page with "== Summary == {{:Summaries:Summary Maxim 1-Wire Thermometer.AlarmOutputPin}} == Description == You can connect this pin to any other pin that can accept Digital( Boolean ) data. The value of this pin will be True if there has been alarm condition before the last reading from the thermometer. After each reading the alarm detection starts again.")
15:36, 10 June 2022 Visuino talk contribs created page Microchip MCP23017 GPIO (Created page with "Image:TArduinoMicrochipMCP23017.png == Summary == {{:Summaries:Summary Microchip MCP23017 GPIO}} == Description == Use this component to control Microchip MCP23017 type I2C GPIO. Diagram: Image:TArduinoMicrochipMCP23017.Preview.png == Categories == *Image:TArduinoDigitalToolbarCategory.png Category Input/Output/Digital - {{:Summaries:Summary Category Input/Output/Digital}} *Image:TArduinoDigitalToolbarCategory.png Category Data Sources/D...")
15:36, 10 June 2022 Visuino talk contribs created page Play Tone.Duration (Created page with "== Summary == {{:Summaries:Summary Play Tone.Duration}} == Description == Use this property to specify the duration of the tone in ms. If 0 is specified, the sound will keep playing until a different tone is specified.")
15:35, 10 June 2022 Visuino talk contribs created page Madgwick Filter (Created page with "Image:TArduinoMadgwick.png == Summary == {{:Summaries:Summary Madgwick Filter}} == Description == Use this component to implement a Madgwick filter fusing Accelerometer, Gyroscope, and Compass data to compute precise 3D orientation. Diagram: Image:TArduinoMadgwick.Preview.png == Categories == *Image:TMathToolbarCategory.png Category Filters/Math - {{:Summaries:Summary Category Filters/Math}} *Image:TMathToolbarCategory.png [[Category Math]...")
15:35, 10 June 2022 Visuino talk contribs created page Maxim Motor Driver Shield.FaultInputPin (Created page with "== Summary == {{:Summaries:Summary Maxim Motor Driver Shield.FaultInputPin}} == Description == Connect this pin to the Digital pin of the board channel connected to the hardware pin of the motor shield indicating fault.")
15:34, 10 June 2022 Visuino talk contribs created page Integer On/Off Switch (Created page with "Image:TArduinoIntegerSwitch.png == Summary == {{:Summaries:Summary Integer On/Off Switch}} == Description == Add this component to Enable or Disable the signal from the Integer input to be sent to the output. Diagram: Image:TArduinoIntegerSwitch.Preview.png == Categories == *Image:TArduinoIntegerToolbarCategory.png Category Integer - {{:Summaries:Summary Category Integer}} == Properties == *Integer On/Off Switch.InitialEnabled|InitialEnable...")
15:34, 10 June 2022 Visuino talk contribs created page Multiply Integer By Value (Created page with "Image:TArduinoIntegerMultiplyByValue.png == Summary == {{:Summaries:Summary Multiply Integer By Value}} == Description == Use this component to multiply the Integer signal by a specified Value. Diagram: Image:TArduinoIntegerMultiplyByValue.Preview.png == Categories == *Image:TMathToolbarCategory.png Category Filters/Math - {{:Summaries:Summary Category Filters/Math}} *Image:TMathToolbarCategory.png Category Math - {{:Summaries:Summary...")
15:34, 10 June 2022 Visuino talk contribs created page Integer 7 Segment Display (Created page with "Image:TArduinoDisplayInteger7Segments.png == Summary == {{:Summaries:Summary Integer 7 Segment Display}} == Description == Use this component to display Integer value over multiple digits 7 Segment display. Diagram: Image:TArduinoDisplayInteger7Segments.Preview.png == Categories == *Image:TArduinoDisplaysToolbarCategory.png Category Integer/Displays - {{:Summaries:Summary Category Integer/Displays}} *Image:TArduinoDisplaysToolbarCategory.png...")
15:34, 10 June 2022 Visuino talk contribs created page PID Controller (Created page with "Image:TArduinoPIDController.png == Summary == {{:Summaries:Summary PID Controller}} == Description == Use this component to implement PID controller. Diagram: Image:TArduinoPIDController.Preview.png == Categories == *Image:TArduinoAnalogToolbarCategory.png Category Filters/Analog - {{:Summaries:Summary Category Filters/Analog}} *Image:TArduinoAnalogToolbarCategory.png Category Analog - {{:Summaries:Summary Category Analog}} == Propert...")
15:33, 10 June 2022 Visuino talk contribs created page Random DateTime Generator (Redirected page to Random Date/Time Generator) Tag: New redirect
15:33, 10 June 2022 Visuino talk contribs created page Integer Value.ClockInputPin (Created page with "{{:Embedded:ClockInputPin Clock}}")
15:33, 10 June 2022 Visuino talk contribs created page PlayStation 2 Controller (Serial Shield).StartButtonOutputPin (Created page with "== Summary == {{:Summaries:Summary PlayStation 2 Controller (Serial Shield).StartButtonOutputPin}} == Description == The Start Button value will be sent trough this pin. You can connect this pin to any other pin that can accept Digital( Boolean ) data.")
15:32, 10 June 2022 Visuino talk contribs created page Random Date/Time Generator (Created page with "Image:TArduinoRandomDateTimeGenerator.png == Summary == {{:Summaries:Summary Random Date/Time Generator}} == Description == Use this component to generate random Date/Time. Diagram: Image:TArduinoRandomDateTimeGenerator.Preview.png == Categories == *Image:TDateTimeToolbarCategory.png Category Generators/Date/Time - {{:Summaries:Summary Category Generators/Date/Time}} *Image:TDateTimeToolbarCategory.png Category Date/Time - {{:Summaries...")
15:32, 10 June 2022 Visuino talk contribs created page LED Bar Analog Display.Enabled (Created page with "== Summary == {{:Summaries:Summary LED Bar Analog Display.Enabled}} == Description == Use this property to Enable or Disable the LED bar display. If the display is disabled, all LEDs will be off.")
15:31, 10 June 2022 Visuino talk contribs created page Infrared(IR) Obstacle Avoidance Sensor.EnableDelay (Created page with "== Summary == {{:Summaries:Summary Infrared(IR) Obstacle Avoidance Sensor.EnableDelay}} == Description == Use this property to specify the Enable delay. This delay starts when the sensor is enabled, and during the delay any detection from the sensor is ignored, as it is assumed to be a false detection during the starting of the sensor.")

Main public logs

Navigation menu

Search