Add Analog Value
Summary
Adds a constant value to an incoming analog signal.
Description
The **Add Analog Value** component increases the input analog signal by a fixed constant. This is useful for calibration, offset correction, or shifting sensor readings upwards by a known value.
- Example:**
If the constant is set to `10` and the value on the **In** pin is `20`, the output on the **Out** pin will be `30`.
Diagram:
Properties
- Enabled – Enables or disables the component.
- Value – The constant analog value to add to the input.
Pins
Input Pins
- In – Analog input signal.
Output Pins
- Out – Analog output after addition.
Categories
- Analog components category
- Math components category- File:TArduinoFilterToolbarCategory.png - Summaries:Summary Category Filter
