View source for Merge Audio Channels from Analog Arrays

[[Image:TArduinoMergeAudioChannels.png]]  

== Summary ==  
Combines multiple analog audio channels into a single audio buffer with configurable format.  

== Description ==  
The **Merge Audio Channels from Analog Arrays** component merges audio data from multiple input channels into a single output buffer.  
You can configure **Bits Per Sample**, number of **Input Pins**, **Sample Rate**, and buffer limits (**Min Samples** and **Max Samples**).  
The **Overfill** clock pin signals when the output buffer has reached its maximum capacity.  
This component is useful for audio mixing, multi-channel signal processing, and preparing audio data for playback or further processing.  

<b>Diagram:</b>  

[[Image:TArduinoMergeAudioChannels.Preview.png]]  

== Categories ==  
*[[Image:TArduinoAudioCategory.png]] [[Category Audio]] – Audio signal processing components.  

== Properties ==  
*'''Bits Per Sample''' – Enables and sets the number of bits per sample (8,16,24,32).  
*'''Input Pins''' – Number of input channels to merge.  
*'''Max Samples''' – Maximum number of samples in the output buffer (default 256).  
*'''Min Samples''' – Minimum number of samples in the output buffer (default 32).  
*'''Sample Rate''' – Audio sample rate (8000,11025,16000,22050,32000,44100,48000,96000,192000 Hz).  

== Pins ==  
=== Input Pins ===  
*'''In''' – Analog audio inputs (number depends on **Input Pins** setting).  

=== Output Pins ===  
*'''Out''' – Merged audio output buffer.  
*'''Overfill''' – Clock output indicating the buffer is full.  

[[Category:Components]]