View source for Infineon TLE8110EE Smart Multichannel Switch (SPI)

[[Image:TArduinoInfineonTLE8110EE.png]]

== Summary ==  
SPI-controlled smart multichannel switch with configurable digital outputs and monitoring pins.  

== Description ==  
The **Infineon TLE8110EE** provides multiple power channels for switching and controlling loads with current monitoring.  
It supports SPI communication and allows configuration of output channels, initial states, and monitoring of under-voltage conditions.  
Suitable for automotive and industrial applications where multiple controlled power outputs are required.  

<b>Diagram:</b>  

[[Image:TArduinoInfineonTLE8110EE.Preview.png]]

== Categories ==  
*[[Image:TArduinoSPICategory.png]] [[Category SPI]] – Components controlled via SPI bus.  
*[[Image:TArduinoDigitalCategory.png]] [[Category Digital]] – Components handling digital signals.  

== Properties ==  
*'''Enabled''' – Enable or disable the component (boolean).  
*'''SPISpeed''' – SPI communication speed (default 5,000,000).  

=== Channels ===  
* Channel[0] (1.5 A) – Properties: Initial Value (boolean), Value Mode (Internal, External, Combined)  
* Channel[1] (1.5 A) – Properties: Initial Value (boolean), Value Mode (Internal, External, Combined)  
* Channel[2] (1.5 A) – Properties: Initial Value (boolean), Value Mode (Internal, External, Combined)  
* Channel[3] (1.7 A) – Properties: Initial Value (boolean), Value Mode (Internal, External, Combined)  
* Channel[4] (1.7 A) – Properties: Initial Value (boolean), Value Mode (Internal, External, Combined)  
* Channel[5] (0.75 A) – Properties: Initial Value (boolean), Value Mode (Internal, External, Combined)  
* Channel[6] (0.75 A) – Properties: Initial Value (boolean), Value Mode (Internal, External, Combined)  
* Channel[7] (0.75 A) – Properties: Initial Value (boolean), Value Mode (Internal, External, Combined)  
* Channel[8] (0.75 A) – Properties: Initial Value (boolean), Value Mode (Internal, External, Combined)  
* Channel[9] (0.75 A) – Properties: Initial Value (boolean), Value Mode (Internal, External, Combined)  

== Pins ==  

=== Input Pins ===  
All channels: Channel[0] to Channel[9] (digital inputs)  
* Reset – Clock input to reset all channels  

=== Output Pins ===  
* Under Voltage – Indicates under-voltage condition (digital).  
* Digital – General digital output monitoring.  
* Analog – Analog output monitoring.  

=== SPI Pins ===  
* SPI – SPI communication pin.  
* Chip Select – SPI chip select pin.  
* Reset – Reset pin for SPI device.  

[[Category:Components]]