View source for Analog Differentiator(Delta Change)

[[Image:TArduinoAnalogDifferentiator.png]]

== Summary ==
Analog differentiator module that outputs the rate of change (delta) of an input signal.  

== Description ==
The Analog Differentiator (Delta Change) module calculates the difference between successive analog input values.  
Triggered by the clock pin, it provides the delta change as an analog output.  
This is useful for detecting trends, slopes, or rapid changes in sensor signals.  

<b>Diagram:</b>

[[Image:TArduinoAnalogDifferentiator.Preview.png]]

== Properties ==
*'''Enabled''' – Enables or disables the differentiator module.  

== Pins ==
=== Input Pins ===
*'''Clock''' – Clock input to trigger differentiation.  
*'''In (analog)''' – Analog input signal.  

=== Output Pins ===
*'''Out (analog)''' – Analog output representing the delta (rate of change).  

== Categories ==
*[[Image:TArduinoMathCategory.png]] [[Category Math]] – Mathematical processing blocks.  
*[[Image:TArduinoAnalogCategory.png]] [[Category Analog]] – Analog signal processing.  

[[Category:Components]]